asfengenie.blogg.se - Eye fi hack

EYE FI HACK MAC OS X
EYE FI HACK INSTALL
EYE FI HACK DRIVERS

I measured the current at 450-480ma, with a Microsoft wireless keyboardmouse USB adapter in the USB port. Putting it on a 12V supply gave me a nice 5.02v, but its more difficult to source a 12v battery thats small enough for my purposes.However, I then spotted the parts lying on my workbench, and as I sat there looking at the parts Id already taken out of the battery grip, I realised it might be possible to use some of them to make a compartment for a Canon 5D Battery, which runs at 7.2 volts.Ī quick test with one of those batteries showed the output of the DC-DC converter at a steady 5.02 volts, so I then attempted to boot the Raspberry Pi.Īnd up it came. Its the guts of an iphone car charger, which converts 12v to 5v, so I tried to see what it would put out if connected to 4xAA batteries, which is the end goal for power,as I want to be able to swap batteries during a shoot. Not ideal, but it gets me away from constantly unplugging the cable.

Works fine on my other linux box, but a full-sized PC wont fit into the battery grip.

EYE FI HACK DRIVERS

Theres a significant problem with the current USB drivers on the Raspbian linux disribution, though.Īfter a few requests to the camera, the gphoto app responds with Unknown Error, and the only solution seems to be to unplug the usb cable and re-insert it. Eye Fi Connect X2 Raw Hack Drivers On The I can pull images from the camera and transmit them via either Wifi or ethernet. With the release of the Raspberry Pi, embedded computing has all of a sudden become much more affordable.Īt 35 for the computer, its far cheaper than any of its rivals.

Eye Fi Connect X2 Raw Hack Drivers On The.

Fire up your camera, take a few shots, and the photos magically appear in the specified directory on your Linux machine. In the terminal, switch to the eyefiserver directory and execute the following command: python EyeFiServer.py -c DefaultSettings.ini Save the file and your server is ready to go. Uncomment then the line that starts with DownloadLocation and specify the path to the directory where you want the server to download photos, for example: DownloadLocation=/home/user/Photos Open then the DefaultSettings.ini file and replace the default UploadKey value with your own. Next, grab the latest version of the Eye-Fi server, unpack all files into a directory ( /home/user/eyefiserver). Once you've done that, open the Settings.xml file (on Windows XP, it's located in the C:\Documents and Settings\\Application Data\Eye-Fi directory) and note the UploadKey value.

EYE FI HACK INSTALL

On a Windows machine, install the Eye-Fi manager software and use it to configure your Eye-Fi card. This must be done in order to obtain the upload key required for the Eye-Fi server to function properly.

EYE FI HACK MAC OS X

You do need to have access to a Windows or Mac OS X machine to initialize your Eye-Fi card, though. Better yet, the server is extremely easy to configure and run. Fortunately, the standalone Eye-Fi server written in Python will happily run on Linux, courtesy of the enterprising hacker Jeff Tchang. The Eye-Fi card is a nifty solution for adding wireless capabilities to virtually any digital camera, but it does have one serious drawback: the card relies on proprietary software that runs only on Windows and Mac OS X.